Vantec Computer Hardware C123 User Manual

2+1 Serial & Parallel

PCI Host Card

Add Serial and Parallel Ports to your

motherboard!

Easily Add 2 Serial Ports and 1 Parallel Port To Any Computer

All 3 Ports Uses 1 PCI Slot

Works With Various USB Devices-Scanners, Modems, Digital Cameras, PDA,

Printers and More...

Compliant with PCI Local Bus Specification, Revision 2.3

Supports 2 x UART Serial Ports

Add one IEEE 1284 Parallel Port on system

Easy Plug and Play

Automatically selects IRQ & I/O address

Built-in 16C450/550 compatible UART

On chip 256 byte FIFOs in transmit and receive path of each serial port

Serial data transfer rate up to 115200bps

Supports Standard Parallel Port (SPP), Enhanced Parallel (EPP) & Enhanced

Capability Port (ECP)

Parallel data transfer rate up to 1.5Mbytes/sec

Introduction:

The Vantec 2+1 SERIAL & PARALLEL PCI HOST CARD is the easiest way to add extra serial and parallel ports to any computer. Compliant

with PCI local bus specification rev. 2.3, this host card will allow you to plug in three different (2 serial and 1 parallel) devices to a computer

whether it be a scanner, modem, digital camera, PDA, printer, etc. Easy to use and easy to install, get your Vantec 2+1 SERIAL & PARALLEL

PCI HOST CARD today.

Specifiactions:

Model:

Interface:

Ports:

UGT-PC2S1P

PCI

2 x Internal Serial Ports (DB9 Male)

1 x External Parallel Port (DB25 Female)

Windows® 2000, XP/2003 32/64-bit, Vista 32/64-bit

142x120x18mm

OS Support:

Dimension:

System Requirement

Computer with an available PCI slot

Windows®2000, XP 32/64-bit, Vista 32/64-bit

Package Contents

Vantec 2+1 Serial & Parallel PCI Host Card, User's Manual, Driver CD, Low Profile Bracket

Send us an e-mail at: [email protected]

All Registered Trademarks Belong To Their Respective Companies