InstallingtheMagneticStripReaderforthe
B-SeriesTouchcomputer
Caution:
The touch computer must be unplugged before any installation occurs.
Included Items:
•
One Elo Magnetic Strip Reader
Revision A
P/N E610216
•
Two mounting screws
5
6
1
Press a small screwdriver into the
cover between the two notches.
As the cover bends up, grasp the
end and peel it away.
Turn off the touch computer.
2
3
Plug the cable into
the connector on the
touchcomputer.
Choose a location to attach the
magnetic stripe reader.
7
Remove the two accessory
covers over the chosen
mounting location.
Insert the hooks on the device
into the corresponding slots on
the touch computer.
8
4
Secure the device to the touch-
computer using the included
screws.
To remove each cover, locate
the two small notches on the
cover.
|
Taylor Freezer TW 357 User Manual
Toastmaster Car Stereo System BTW09 User Manual
Toastmaster Mixer RHHM16 User Manual
Toastmaster Rice Cooker TRC3 User Manual
Toshiba Computer Drive SD R1512 User Manual
Toshiba CRT Television WLT66 User Manual
Tripp Lite Network Cables N201 014 WH User Manual
Vox Musical Instrument Amplifier VT120+ User Manual
Wagner SprayTech Heat Gun HT3500 User Manual
Wayne Septic System 330102 001 User Manual