Point-of-Use
Rheemglas® Energy Miser® Electric Water Heaters
ꢀAvailable in 2-1/2, 6, 10, 20 and 30 Gallon Models
ꢀ
2-Year Limited Tank Warranty
1-Year Limited Parts Warranty*
2-1/2 gallon model features:
Space-saving design for installation in
limited spaces
•
120 volt model with 3 prong cord
•
set…simply plug it in!
High efficiency heating element
Temperature and pressure relief valve
included
Over-temperature protector cuts off power
in excess temperature situations
Automatic thermostat keeps water at
desired temperature
•
•
Wall bracket for easy wall mount installations
Corrosion resistant 1/4 turn drain valve
•
2-1/2 Gallon
•
•
•
*See Residential Warranty Information Brochure for
complete warranty information.
6, 10, 20 and
30 Gallon
DESCRIPTION
ROUGHING IN DIMENSIONS (SHOWN IN INCHES)
HT. TO HOT
WATER OUTLET
B
HT. TO
SIDE T&P
D
HT. TO COLD
WATER INLET
E
TANK CAPACITY
APPROX. SHIP WT.
LBS. KG
HEIGHT
A
DIAMETER
C
MODEL NO.
U.S. GAL.
2.5
6
IMP. GAL.
LITRES
9
RE2
2
14
14
9-3/4
–
–
22
10
16
21
31
41
RE6
5
23
15-1/4
23
12-1/2
20-1/2
22-3/4
23
15-3/4
15-3/4
19-3/4
21-3/4
11-1/2
19-1/2
21-3/4
23
4-1/4
4-1/4
5
36
46
69
91
RE10
RE20
82VP30-1
10
8.5
17
39
20
77
25-1/4
30
30
23
105
2-3/4
• 2.5 gallon model: 1⁄2" N.P.T. inlet and outlet. Relief valve
connection 3⁄4". Available with 120 volt AC single phase only, 120v
(1440w). Power cord supplied with 120 volt models only.
Rheem Point-of-Use
small amount of hot water is required! These units are U.L. listed and comply
with Underwriter’s Laboratories Specifications 174.
A convenient, compact size water heater that installs almost anywhere a
• 6 through 30 gallon models: 3⁄4" N.P.T. outlet, inlet, anode rod.
T&P valve connections. Not available with 3 phase wiring. Water
heaters furnished standard with 120 volt AC 1500 watt single
element or 240 volt AC 3000 watt single element. Special wiring
options – a limited number of wiring options are available. Consult
factory for price and availability.
3-1/2"
HOT WATER
CONNECTION
COLD WATER
CONNECTION
CONSTRUCTION DETAILS: The cold water enters the tank a few
inches from the bottom. Both hot and cold water lines may be
connected directly to the water heater without special nipples or
tees. The relief valve simply screws into the opening provided.
ANODE
ROD
HOT
WATER
OUTLET
C
RELIEF VALVE
CONNECTION
These units are designed to meet or exceed ANSI (American
National Standards Institute) requirements and have been tested
according to C.S.A. test procedures and meet or exceed the energy
efficiency requirements of NRCan, ASHRAE standard 90, and all
government energy efficiency performance criteria for energy con-
suming appliances.
C
RELIEF VALVE
DIAMETER
A B D
COLD
WATER
INLET
A
B
Before purchasing this appliance, read important energy cost and
efficiency information available from your supplier.
E
WATER CONNECTIONS ALL 1/2" N.P.T.
RELIEF VALVE CONNECTIONS 3/4" N.P.T.
6
,
1
0
,
2
0
AND
30
U.S.
G
A
L
L
O
N
MODELS
2-1/2 U.S. GALLON MODEL
In keeping with its policy of continuous progress and product improvement, Rheem reserves the right to make changes without notice.
EST. 1947
Rheem Manufacturing Company • Water Heater Division
Rheem Canada Ltd.,128 Barton Street West, Hamilton, Ontario L8N 3P3
Customer Service 1-800-268-6966
RHEEM
CANADA
LTD/LTÉE
THANKS TO OUR EMPLOYEES
WE ARE
Warranty
1-800-263-8342
ISO9002
REGISTERED
FORM NO. 101-8CAN Rev. 1
06/08 WP
|