Bluetooth Wireless Headset
User Manual (GBE201)
®
nload from Www.Somanuals.com. All Manuals Search And Down
Welcome
Enjoy true hands-free freedom with the IOGEAR Wireless Bluetooth
Headset. This ultra-lightweight headset enables you to wirelessly use
your Bluetooth cell phone, ending messy and potentially dangerous
wire tangles. The IOGEAR Bluetooth Headset will clearly transmit all
your phone calls wirelessly to your phone via Bluetooth radio
technology.
Its stylish and compact design makes it very easy and comfortable
to wear.
Among its many features are a built-in rechargeable battery for long
battery life, easy-to-reach volume control, and ear hook for secure
wearing.
nload from Www.Somanuals.com. All Manuals Search And Down
Welcome
The GBE201 follows the Bluetooth 1.1 specification and supports the
headset and hands-free profile.
The Bluetooth headset also comes with a USB charger cable to
make it convenient for mobile users to charge the unit while on the
road.
nload from Www.Somanuals.com. All Manuals Search And Down
Table of Contents
Package Contents
Features
System Requirements
Introduction
Specification
2
3
4
5
12
42
43
Technical Support
Radio & TV Interference
Statement
45
46
Pairing to Bluetooth Phone
How to use headset
· Making a call
Limited Warranty
17
19
21
· Ending a call
· Answering a call
Connecting Headset
to PC/laptop
23
40
FAQ/Troubleshooting
nload from Www.Somanuals.com. All Manuals Search And Down
Package Contents
1 Bluetooth headset
1 Ear hook
1 Neck strap
1 Power adapter
1 USB charging cable
1 User manual
1 Warranty/Registration card
nload from Www.Somanuals.com. All Manuals Search And Down
2
Features
•
•
Hands-free communications via your Bluetooth cell phone
Use headset on your PC/Laptop to make calls using programs
like Skype, MSN messenger, etc.
•
•
•
•
•
•
•
Compatible with Bluetooth 1.1 specifications
Support both Headset profile and Hands-free profile
Easy operation and comfortable wear
Ear hook included to ensure secure wearing
Volume control included
Built-in re-chargeable battery
Light and attractive design
nload from Www.Somanuals.com. All Manuals Search And Down
3
Requirements
Bluetooth cell phone with either Headset profile or Hands-free profile
nload from Www.Somanuals.com. All Manuals Search And Down
4
Introduction
1. Multi-function – used to turn headset ON/OFF, set it in
discovery mode for pairing, and answer/terminating calls
2. Volume up – increase the volume on the headset
3. Volume down – decrease the volume on the headset
4. Power jack – insert power cable to charge internal battery
5. LED window – displays red and blue LEDs
6. Speaker – this is the speaker for incoming voice calls
7. Microphone – this is the microphone for outgoing voice calls
please refer to the picture on the next page
nload from Www.Somanuals.com. All Manuals Search And Down
5
Introduction
5
2
3
1
6
7
4
nload from Www.Somanuals.com. All Manuals Search And Down
6
Introduction
LED Indicator lights
Blue LED:
•
Flashes approximately every six (6) seconds when the headset
is ON (standby mode)
•
Flashes very rapidly when in discovery mode to pair with your
Bluetooth phone
Red LED:
•
Remains ON while headset is charging and also when in
discovery mode
•
Flashes when the headset battery is low.
nload from Www.Somanuals.com. All Manuals Search And Down
7
Introduction
Turn ON the headset
1. Press and hold the multi-function button for about six (6)
seconds; the blue LED will flash quickly four (4) times.
Thereafter, it will flash once every six seconds.
Turn OFF the headset
1. Press and hold the multi-function button for about three (3)
seconds; the red LED will flash four (4) times and then turn off.
nload from Www.Somanuals.com. All Manuals Search And Down
8
Introduction
Charging the Battery
You must charge the internal battery of the Bluetooth headset before
your first use. Thereafter, the red LED will flash when the battery is
low and emit a warning sound.
To charge the battery, follow the procedure below:
1. Turn OFF the headset
2. Connect either the USB charger cable or AC adapter into the
power jack of the Bluetooth headset
3. The Red LED will remain ON while the headset is charging.
Once the headset is fully charged, the red LED will turn OFF. It
takes about 2.5 hours to fully charge the headset.
A fully-charged battery will give you approximately 4.5 hours of talk time, and 100
hours stand-by time.
nload from Www.Somanuals.com. All Manuals Search And Down
9
Introduction
Attaching ear hook (for right ear wearing)
1. Position the headset with the speaker pointing inward (see
image on the next page)
2. Position the ear hook with the clip-on facing down
3. Snap the ear hook onto the neck of the speaker
TIP: To use the headset on the left ear, follow the steps as above, except that on
#1, position the headset with the speaker pointing outward.
Placing headset on your ear
1. Wrap the ear hook around your ear
2. Insert the speaker piece into your ear
please see image on next page
nload from Www.Somanuals.com. All Manuals Search And Down
10
Introduction
nload from Www.Somanuals.com. All Manuals Search And Down
11
Pairing to Bluetooth Phone
Pairing Procedure
Pairing is a Bluetooth function that enables Bluetooth devices to
remain permanently linked to each other. By pairing devices, you
only need to authenticate and authorize communication between
your devices once. During the pairing procedure, a PIN code is
required for secure authentication. Thereafter, communication
between your two Bluetooth devices is done automatically without
requiring authentication or confirmation.
For the procedure below, you will need to know how to use your cell
phone’s Bluetooth feature for discovering, connecting, and pairing to
other Bluetooth devices. If you’re not sure how to do this, please
consult your cell phone user manual.
nload from Www.Somanuals.com. All Manuals Search And Down
12
Pairing to Bluetooth Phone
To pair the IOGEAR Bluetooth headset with your Bluetooth phone,
follow the procedure below:
1. Make sure that the IOGEAR Bluetooth headset is OFF.
2. Press and hold the multi-function button for about nine (9)
seconds; the red LED will turn ON and the blue LED will start
rapidly flashing; the headset is now in pairing mode.
NOTE: If only the blue LED is on, the headset is in stand-by mode; repeat the
step again and make sure the red LED is on and blue LED is blinking. The
Bluetooth headset will remain in pairing mode for approximately five minutes.
If no pairing takes place during that time interval, it will switch to stand-by
mode.
nload from Www.Somanuals.com. All Manuals Search And Down
13
Pairing to Bluetooth Phone
3. Follow your cell phone’s instructions to search for Bluetooth
devices. The IOGEAR Bluetooth headset will show up as
“IOGEAR BT Headset.” If the headset is not found on your first
attempt, try again as it may take a few tries the first time you
search for the device.
4. Select the Bluetooth headset (“IOGEAR BT Headset”) and
select the pairing option. If you are prompted for a PIN code,
enter “1234”
5. You are now paired to the headset!
Below are two examples for your reference. The instructions will vary
depending on the brand/model of phone that you have. If you still
have problems using the Bluetooth functionality of your phone,
please consult your cell phone’s user manual.
nload from Www.Somanuals.com. All Manuals Search And Down
14
Pairing to Bluetooth Phone
Example 1 – Nokia 3650
1. Make sure that the IOGEAR Bluetooth headset is OFF.
2. Set the Bluetooth headset in pairing mode as indicated in the
pairing procedure.
3. Nokia 3650 pairing procedure:
a.
b.
c.
d.
Go to the phone menu
From the list, select Connectivity
Click on Bluetooth, and then select Options
Now, click on “New paired device” – this will start searching for the
Bluetooth headset
e.
f.
The headset will be displayed as “IOGEAR BT Headset”
Select the headset and when prompted for a Passcode/PIN, enter
“1234”
4. You are now paired to the IOGEAR Bluetooth headset!
nload from Www.Somanuals.com. All Manuals Search And Down
15
Pairing to Bluetooth Phone
Example 2 – Sony Ericsson T616
1. Make sure that the IOGEAR Bluetooth headset is OFF.
2. Set the Bluetooth headset in pairing mode as indicated in the
pairing procedure.
3. Ericsson T616 pairing procedure:
a.
b.
c.
d.
e.
Access the main menu
Select the “Connect” option and then select Bluetooth
Make sure Bluetooth function is turned ON (if not click on Turn On)
Go down to the option “My Devices” to see a list of Bluetooth devices
To search for the Bluetooth headset, click on “New Device” which will
start looking for the Bluetooth headset
f.
g.
The headset will be displayed as IOGEAR BT Headset.
Select it and when prompted for a Passcode/PIN, enter “1234” and then
select OK
4. You are now paired to the IOGEAR Bluetooth headset!
nload from Www.Somanuals.com. All Manuals Search And Down
16
How to Use Headset
Before proceeding, please check the following:
First, make sure that you have already paired the Bluetooth headset
with your cell phone. Otherwise, you will be prompted to authorize
the connection every time the Bluetooth headset communicates with
your phone. Please refer to the section “Pairing to Bluetooth Phone”
for additional information.
Making a call
1. Put on the Bluetooth headset (make sure that it’s turned on).
2. Dial the desired number using your phone’s keypads
3. Press the connect/send button to initiate the call
4. The call should automatically be transferred to the Bluetooth
headset.
nload from Www.Somanuals.com. All Manuals Search And Down
17
How to Use Headset
NOTE: If the phone call is not automatically transferred to the Bluetooth headset,
press the multi-function button once to transfer the call to the headset. Your phone
may prompt you if you wish to accept the connection from the Bluetooth headset;
simply click Yes/OK.
If you still cannot get your phone to transfer calls to the Bluetooth headset, we
suggest you to consult your cell phone’s user manual for instructions on configuring
your phone to use with a headset.
nload from Www.Somanuals.com. All Manuals Search And Down
18
How to Use Headset
Ending a call
If you wish to terminate a call while using the Bluetooth headset,
please do the following:
1. Press the multi-function button once to hang up
2. You should now hear a beep sound from the headset indicating
call has terminated
Alternatively, you can terminate the phone call in the usual way using
your cell phone’s keypads.
nload from Www.Somanuals.com. All Manuals Search And Down
19
How to Use Headset
Redial a number
If you wish to redial the last number using the Bluetooth headset,
please follow the procedure below:
1. Press and hold any of the volume buttons (volume up or volume
down) for approximately 3-5 seconds.
Note: If your phone has not previously used the headset, this may take longer
as the phone will ask for confirmation to use the Bluetooth headset
2. Your cell phone will start redialing the last number
nload from Www.Somanuals.com. All Manuals Search And Down
20
How to Use Headset
Answering a call
Before proceeding, make sure you have already paired your
Bluetooth phone and headset.
1. Put on the Bluetooth headset (make sure that it’s turned on).
2. When you hear the ring tone on the headset, simply press the
multi-function button once to pick up the call.
Note: If the call is being transferred to your cell phone directly instead of the
Bluetooth headset, press the multi-function button once on the headset to
force your phone to use the headset.
If you still cannot get your phone to transfer calls to the Bluetooth
headset, we suggest you to consult your cell phone’s user manual for
instructions on configuring your phone to use with a headset.
nload from Www.Somanuals.com. All Manuals Search And Down
21
How to Use Headset
Reject a call
To reject a call using the headset, do the following:
1. You will hear the ringing tone on your Bluetooth headset
2. Press and hold the multi-function button for 3 seconds until your
phone stops ringing
nload from Www.Somanuals.com. All Manuals Search And Down
22
Connecting Headset to PC/laptp
The IOGEAR Bluetooth headset can also be used on your PC/
Laptop. Why would you want to use your headset on your computer?
The answer is simple:
• Voice Over IP
Please note that in order for this to work, the Bluetooth software on
your PC/Laptop, must support the Headset profile. For the examples
shown below, we used the WIDCOMM Bluetooth software v3.0.x
which supports Headset profile.
If you’re not sure what profiles your Bluetooth software supports,
please check with the vendor of your Bluetooth device/software.
nload from Www.Somanuals.com. All Manuals Search And Down
23
Connecting Headset to PC/Laptop
1. Open My Bluetooth Places and click on Search for devices in
range. The headset will be displayed as “IOGEAR BT Headset”
nload from Www.Somanuals.com. All Manuals Search And Down
24
Connecting Headset to PC/Laptop
2. Right-click on the icon representing the IOGEAR headset, and
select “Pair Device.” When prompted for a PIN code, enter “1234”
nload from Www.Somanuals.com. All Manuals Search And Down
25
Connecting Headset to PC/Laptop
3. To access the services offered by the headset, double-click the
IOGEAR headset icon. Now, right click on the icon displayed
below and select “Connect Headset.”
nload from Www.Somanuals.com. All Manuals Search And Down
26
Connecting Headset to PC/Laptop
4. Upon successful connection, the icon will turn green and it will
say “connected” as shown below. Also note that the Bluetooth
icon on your tray bar will turn green.
nload from Www.Somanuals.com. All Manuals Search And Down
27
Connecting Headset to PC/Laptop
5. If you hear a long-beep sound on the headset, click the multi-
function button once to transfer the audio on your computer to
the headset.
nload from Www.Somanuals.com. All Manuals Search And Down
28
Connecting Headset to PC/Laptop
Voice Over IP
With Voice-Over-IP programs, you can use your Internet connection
to make calls to your family/friends over the Internet. Examples of
these are chat programs that let you have voice conversations such
as MSN messenger, yahoo messenger, etc. The instructions below
are provided as an example, but they should work for most Voice-
Over-IP programs, with minor configuration necessary. Here we
show two examples of Voice-OVER-IP programs:
- SKYPE
- MSN Instant Messenger
nload from Www.Somanuals.com. All Manuals Search And Down
29
Connecting Headset to PC/Laptop
Bluetooth Audio Drivers
Before proceeding, you need to check that your Bluetooth software
has properly installed all Audio drivers necessary; otherwise, you will
not be able to use the Bluetooth headset as an audio device. To
verify this, go to Control Panel and look under Sound, video and
game controllers, as shown below.
In our example, you can see that the Bluetooth audio drivers have
been added to our system and appear as “Bluetooth Audio Device”
(the name and location might vary in your case). If your system does
not show any Bluetooth audio drivers that you can see, please
consult your Bluetooth software manual or check with your device
vendor.
nload from Www.Somanuals.com. All Manuals Search And Down
30
Connecting Headset to PC/Laptop
nload from Www.Somanuals.com. All Manuals Search And Down
31
Connecting Headset to PC/Laptop
SKYPE
Configure software
Before you can use the Bluetooth
headset with your Voice-Over-IP
program, you need to first specify the
headset as the source for Audio-IN and
Audio-OUT.
1. First, click on the File menu and
select Options
nload from Www.Somanuals.com. All Manuals Search And Down
32
Connecting Headset to PC/Laptop
2. Now go to the Hand/
Headsets tab. As you
see below, the sound
device specified is the
Windows default device
(most likely your PC/
Laptop speakers).
nload from Www.Somanuals.com. All Manuals Search And Down
33
Connecting Headset to PC/Laptop
3. Click on each of the
menu options and
select Bluetooth Audio
and then click Save.
NOTE: The name of the
audio device shown here is
what was displayed in
Control Panel under the
Sound, video and game
controllers section.
nload from Www.Somanuals.com. All Manuals Search And Down
34
Connecting Headset to PC/Laptop
4. You should now be able to use the IOGEAR Bluetooth headset
as your audio device with your Voice-Over-IP software. If you
encounter any problems, please consult your software
documentation.
nload from Www.Somanuals.com. All Manuals Search And Down
35
Connecting Headset to PC/Laptop
MSN Messenger Voice chat
Configure software
Before you can use the Bluetooth
headset with your Voice-Over-IP
program, you need to first specify the
headset as the source for Audio-IN
and Audio-OUT.
1. First, click on the Tools menu and
select Audio Tuning Wizard
nload from Www.Somanuals.com. All Manuals Search And Down
36
Connecting Headset to PC/Laptop
2. When prompted to specify
your Audio device, make
sure to select Bluetooth
Audio, and then click Next.
NOTE: The name of the audio
device shown here is what was
displayed in Control Panel under
the Sound, video and game
controllers section.
nload from Www.Somanuals.com. All Manuals Search And Down
37
Connecting Headset to PC/Laptop
3. Once the wizard has completed, click on
Actions > Start a Voice Conversation,
and select the person you want to invite
to your conversation.
nload from Www.Somanuals.com. All Manuals Search And Down
38
Connecting Headset to PC/Laptop
4. You are done!
nload from Www.Somanuals.com. All Manuals Search And Down
39
FAQ/Troubleshooting
Q1. My Bluetooth phone cannot find the IOGEAR Bluetooth
headset, what is wrong?
Please make sure that you have set the headset in pairing mode
(discoverable mode) as indicated in the “Pairing Procedure” section
of this manual. Please keep in mind that if the Blue LED is blinking,
but the red LED is off, the headset is in stand-by mode. In order for
the headset to be in pairing mode, the blue LED must be blinking
and red LED must be ON.
Q2. Why won’t my Bluetooth headset turn on?
Before you can use the IOGEAR Bluetooth headset, you must fully
charge it for at least 2.5 hours.
nload from Www.Somanuals.com. All Manuals Search And Down
40
FAQ/Troubleshooting
Q3. What Bluetooth phones are compatible with the IOGEAR
Bluetooth headset?
Most phones that are compatible with the Headset or Handsfree profile
should work with the headset. If your phone is Bluetooth-enabled, but
does not support either of these profiles, it will not work with the
headset. Please check with your phone manufacturer if you’re not sure.
Q4. How do I use the USB charging cable?
Simply connect the USB charging cable to an available USB port on your
computer to charge the IOGEAR Bluetooth headset. Make sure that your
computer is turned ON so that it provides power to the headset. Please
note that if you connect the charging cable to a USB non-powered hub,
the headset may not receive enough power to charge
nload from Www.Somanuals.com. All Manua.ls Search And Down
41
Specifications
nload from Www.Somanuals.com. All Manuals Search And Down
42
Technical Support
To help IOGEAR® customers obtain the highest level of performance
from their ION™ Drive, the IOGEAR Service Support team is
available to answer your technical questions.
Please be sure to visit our Technical Information Library (TIL) is
TIL has answers to many common questions and problems that may
already have solutions available.
IOGEAR Service & Support can be reached from 8am to 5pm (PST)
Monday through Friday, or at the following address:
23 Hubble Drive, Irvine, CA 92618
nload from Www.Somanuals.com. All Manuals Search And Down
43
Technical Support
866-9-IOGEAR (866-946-4327) (Press “4” for Technical Support)
You may also e-mail us 24-hours a day, 7 days a week by sending
Please Note: We will generally respond to your inquiry within 24-48 hours;
however, due to increasing demand for pre-sales and technical information for our
products, response times can and may fluctuate. Therefore, if you have an urgent
inquiry, we recommend calling our Service Support Department for immediate
assistance.
Please be ready to give a brief description of the problem, and what you were
doing when the problem occurred, before calling Service Support.
nload from Www.Somanuals.com. All Manuals Search And Down
44
Radio & TV Interference Statement
WARNING!!! This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with
the instruction manual, may cause interference to radio communica-
tions. This equipment has been tested and found to comply with the
limits for a Class B computing device pursuant to Subpart J of Part
15 of FCC Rules, which are designed to provide reasonable
protection against such interference when operated in a commercial
environment. Operation of this equipment in a residential area is
likely to cause interference, in which case the user at his own
expense will be required to take whatever measures may be required
to correct the interference.
nload from Www.Somanuals.com. All Manuals Search And Down
45
Warranty
IN NO EVENT SHALL THE DIRECT VENDOR’S LIABILITY FOR
DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL
DAMAGES RESULTING FROM THE USE OF THE PRODUCT, DISK,
OR ITS DOCUMENTATION EXCEED THE PRICE PAID FOR THE
PRODUCT.
The direct vendor makes no warranty or representation, expressed,
implied, or statutory with respect to the contents or use of this
documentation, and especially disclaims its quality, performance,
merchantability, or fitness for any particular purpose.
nload from Www.Somanuals.com. All Manuals Search And Down
46
Warranty
The direct vendor also reserves the right to revise or update the
device or documentation without obligation to notify any individual or
entity of such revisions, or updates. For further inquires please
contact your direct vendor.
nload from Www.Somanuals.com. All Manuals Search And Down
47
®
Contact info.
nload from Www.Somanuals.com. All Manuals Search And Down
|